No products
Check out
1000 LITERS INOX CYLINDER - CONIC TANK FEATURES • Made of INOX 304 steel• 60º conical bottom• Interior finish RA <0.5 μm (grade 220)• Exterior Finish <0.8 μm (grade 120)• Adaptation for triclamp fittings included (other types on demand).• All deposits have a maximum volume ofabout +/- 20% (example 500 lts =...
ECO QUALITY no jacketed 300 liters isobaric fermenter. It is used interchangeably for storage in the case of wine, beer, oil ... or fermentation for beer and wine ... FEATURESManufactured in INOX 304 steel 60º conical bottom Interior finish RA <0.5 μm (grade 220) Exterior Finish RA <0.8 μm (grade 120)...
400 LITERS INOX CYLINDER - CONIC TANK DRUM & CONE JACKETED. It is used interchangeably for storage in the case of wine, beer, oil ... or fermentation for beer and wine ... FEATURES • Made of INOX 304 steel• 60º conical bottom• Interior finish RA <0.5 μm (grade 220)• Exterior Finish RA <0.8 μm (grade 120)•...
CIP equipment designed to easily perform the necessary cleaning tasks in small, medium and large industries.For the cleaning of tanks, hoses, bottling equipment ... BASIC VERSIONA stainless steel tank 316 capacity 500 ltrs for the preparation of the formula for cleaning, with top cover, flat bottom with top...
It is used interchangeably for storage in the case of wine, beer, oil ... or fermentation for beer and wine ... and for other products consult. Closed stainless steel tanks with upper door, for storage and fermentation. With lower mouth to facilitate emptying and cleaning the tank. - Stainless steel tank (AISI...
Supplementary table for the control of 8 tanks. For large teams from W3 to W11.
Hydraulic press incorporating a mill and motor mixer.- Approximate production of 30 kg / h.- Actuation of the press by means of a manual or motorized hydraulic jack.- Pressure of 350 Bar.- Dish diameter of 270 mm.- Press measurements: 1,500 x 1,000 x 2,500 mm.- Approximate total weight of 160 Kg. (Manual press...
Made of 304 stainless steel, fine satin finish inside and outside, polished gloss. It is used interchangeably for storage in the case of wine, beer, oil ... or fermentation for beer and wine ... FeaturesThickness of the insulating chamber of the inner body: 80 mm. Thickness of internal sheet 3 mm. External sheet...
500 LITERS INOX CYLINDER - CONIC TANK DRUM & CONE JACKETED. It is used interchangeably for storage in the case of wine, beer, oil ... or fermentation for beer and wine ... FEATURES • Made of INOX 304 steel• 60º conical bottom• Interior finish RA <0.5 μm (grade 220)• Exterior Finish RA <0.8 μm (grade 120)•...
Manual filler in which all the elements in contact with the product are made entirely of 316L stainless steel. It is designed to fill bags from 1.5L to 20L. It is compatible with a wide range of faucets, valves and plugs. Uncapping and capping is done manually using an ergonomic mobile arm. The filler has an...
Custom electric box for the control of all wine processes and for the management of refrigerators. For large teams from W13 to W39.
Deposits with a flat bottom inclined 5% very suitable for winemaking with skins or skins and storage.Unlike the models with a conical bottom, once the fermentation and deviation have finished, the manhole and the bottom inclined to the door make it easier to remove the skins. They are also equipped with an internal...
FREEZER FOR CHAMPAGNE BOTTLES NECKS PG32 32 SLOTS Stainless steel chassis mounted on wheels Machine completely built in stainless steel. Isolated tank liquid, rotating circular plate Freezer unit with semi-hermetic compressor. CE electrical board with digital thermostat. 220 - 230 V PRODUCTION 100 to 150 BOTTLES /...
500 lt. jacketed tank, with rectangular door, round legs over 1500 lt., cleaning tap, dirt tap and test tap in chrome, with graduated ladder attached to the tank, sight glass and level tap for tanks over 1500 lt. No level pipe up to 1000 lt.
Filter 20 plates 40 x 40 model Tauro INOX.Stainless steel frame, solid stainless steel press plates, non-deformable for ALL THE USEFUL LIFE.With this model, losses of drip fluid are practically eliminated.Performance similar to closed drum filters. Features Minimum thickness of solid 34 mm stainless plates without...
Iron plates and crossbar covered in stainless steel.Short ruffle, limited crimping can cause dripping. Manual screw closure, 2 butterfly valves, 2 pressure gauges, 2 sight glasses, oil collection tray,stainless steel drips, possibility of steam cleaningand sterilize.To see better qualities consult other filters.- In...
ECO QUALITY no jacketed 400 liters isobaric fermenter. It is used interchangeably for storage in the case of wine, beer, oil ... or fermentation for beer and wine ... FEATURESManufactured in INOX 304 steel 60º conical bottom Interior finish RA <0.5 μm (grade 220) Exterior Finish RA <0.8 μm (grade 120)...
100 LITERS INOX TANK WITH 60º CONICAL BOTTOM HIGH QUALITY MODEL DRUM JACKETED FOOD GRADE FINISHED. It is used interchangeably for storage in the case of wine, beer, oil... or fermentation for beer and wine... CHARACTERISTICSManufactured in INOX 304 steel. upper door DN 400 mm closing with peripheral levers. Level...
300 liters Isobaric tank INOX 304 stainless steel made drum 500 mm jacketed. It is used interchangeably for beer and wine fermentation ... Features60º conical bottom Interior finish RA <0.5 μm (grade 220) Exterior Finish RA <0.8 μm (grade 120) Working pressure 2,5 bar Pressure gauge, analog thermometer and...
Reinforced hydraulic press, electric motor operation. Applied in the extraction of must from fermented red grapes and delicate white grape wines. It is recommended to use straws to drain the musts and prevent splashing.Support structure in varnished steel with high mechanical resistance. Double effect piston....
Filter 40 plates 40 x 40 model Tauro INOX.Stainless steel frame, solid stainless steel press plates, non-deformable for ALL THE USEFUL LIFE.With this model, losses of drip fluid are practically eliminated.Performance similar to closed drum filters. Features Minimum thickness of solid 34 mm stainless plates without...
Filter 20 plates 40 x 40 model Tauro INOX with centrifugal pump. Stainless steel frame, solid stainless steel press plates, non-deformable for ALL THE USEFUL LIFE.With this model, losses of drip fluid are practically eliminated.Performance similar to closed drum filters. Features Minimum thickness of solid 34 mm...
Volumetric dispensers, fully pneumatic operation. The product to be packaged can be extracted both from a tank or container placed under the machine and from a storage container without the help of external pumps. It makes it possible to fill any container with liquid and semi-dense products, and they are...
Filter 60 plates 40 x 40 model Tauro INOX.Stainless steel frame, solid stainless steel press plates, non-deformable for ALL THE USEFUL LIFE.With this model, losses of drip fluid are practically eliminated.Performance similar to closed drum filters. Features Minimum thickness of solid 34 mm stainless plates without...