INOX TANK 5.000 LITERS STANDARD INCLINED FLAT FUND 5%

7 865,00 €

Add to cart



IVA incluido

9 252,94 €

-15%

DESTID5000

Reduced price!

Deposits with a flat bottom inclined 5% very suitable for winemaking with skins or skins and storage.
Unlike the models with a conical bottom, once the fermentation and deviation have finished, the manhole and the bottom inclined to the door make it easier to remove the skins. They are also equipped with an internal strainer grid for pumping over. Automated self-emptying tanks with propeller and conical bottoms with sash doors (hydraulic or pneumatic) can be manufactured in this line.

FINISHES: * stainless steel sheet: interior and exterior matte finish. Body sheet thickness 2mm from 3.000 liters * TIG welds with inert gas, coated, passivated, brushed.

DETAIL * Top: 45º conical dome centered, 400mm diameter centered access manhole with gasket, cover, flywheel and opening system with arm and rotating bolt. Double acting safety valve (pressure / depression) in 304l stainless steel. * Cylinder: complete level with 304l stainless steel gas threaded tap with plastic hose, with calibrated profile of general capacity.
Nameplate and identification. Supports stairs from 3,000l.
Tap takes samples in stainless steel. Rectangular lower mouth with external opening, complete with gasket, closing flywheel and bolts. Front thermometer holder pod. Wrap-around heat exchange jacket with 1 "gas fitting.

Rear thread with plug for PT100 probe. Traced tube from 3,000l. Inner strainer grid with outer outlet butterfly valve with NW 50 male to facilitate the reassembly and retention of the skins. * Bottom: Flat bottom inclined 5% with a slope towards the front to facilitate the deviation and removal of the skins. Total emptying outlet next to the lower mouth at the bottom of the 304 stainless steel butterfly valve NW 50 male outlet. Tapered feet with nut and adjustable bolts for perfect alignment (+/- 60mm). With stainless steel floor support plates diameter 140mm.

More details

May contain traces of machining fluid and undesirable odors.
A good cleaning is necessary to avoid migrations.
Smell the inside of the taps.

Optional: adaptation of agitators, inertisation, external cleaning tube with internal shower, thermal jackets, search for clear ... (on request). Material of construction all in stainless steel 304L, possibility of construction in 316L on request.

* Identification and approval: Sanitary registration of industries and food products RSPAC 3905561 / CAT. In accordance with the provisions of article 4, 5th paragraph of D.L. 01/25/92 No. 108 and CEE directive 89/109. Identification plate for manufacturing, cubing and identification.

Capacity

Diameter ApproximateTotal Height ApproximateThickness SheetNº LegsHeight  Shirt
1.000 ltrs1050 mm2054 mm1,5 mm3500 mm
1.500 ltrs1150 mm2300 mm1,5 mm3500 mm
2.000 ltrs1330 mm2300 mm1,5 mm3500 mm
2.500 ltrs1390 mm2650 mm1,5 mm3500 mm
3.000 ltrs1390 mm2850 mm1,5 mm3750 mm
5.000 ltrs1700 mm3078 mm2 mm4750 mm
10.000 ltrs2000 mm3500 mmm2 mm41.000 mm

* For production reasons, measurements may vary, if you need to know the exact measurement, consult previously. *